Wavecom G900 Instrukcja Użytkownika Pobierz pdf (Strona 41)

Wavecom GSM Modem

This confidential document is the property of WAVECOM and may not be copied or circulated without permission

AT+CPWD=<fac>,<oldpassword>, <newpassword>

for <fac> see +CLCK command.

Application to GSM AT+CPWD="AO",1234,5555 change password

GSM to application OK Password was good

Application to GSM AT+CPWD="AO",1234,5555 Change password

GSM to application +CME ERROR: 16 password wrong

Application to GSM AT+CPWD="AO",5555,1234 change password

GSM to application OK Password was good

6.4. Call waiting +CCWA

This command allows control of the call waiting supplementary service.

The module supports only one communication. If a call waiting call happens,

the module will disconnect it.

The command to manage this functionality is :

AT+CCWA=<n>,<mode>[, <class>]

* <n> : (result code presentation status in the TA)

0 disable

1 enable

* <mode> :

0 disable

1 registration

2 interrogate

Application to GSM AT+CCWA=1,1 enable call waiting

GSM to application OK command valid

Application to GSM AT+CCWA=1,2 interrogate call forwarding unconditional

GSM to application +CCWA="x",7

"x" = 1 active

"x" = 0 not active

GSM to application RING

+CCWA:

+146290800,145,7

NO CARRIER

incoming call

number of the incoming call

incoming call is disconnected

Application to GSM AT+CCWA=1,0 erase call waiting

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 66 67

Brak uwag

Wavecom G900 Instrukcja Użytkownika Strona 41